Ceramic Base Lamp Kit17 5119161

Ceramic Base Lamp Kit17 5119161

This kit is made for creating your own one-of-a-kind custom lamp, helping convert a beautiful ceramic item that you already own into a stunning original lamp.
To be used with a ceramic base that has a small hole in the side and a larger hole in the base.

Kit Includes:

• 1 x Lampholder
• 1 x 2.5m 2Core Cable Cord Set
• 1 x Strain Relief
• 1 x Plastic Pottery Nipple (Diam. 10mm)
• 1 x Plastic Washer (Diam. 23mm)
• 1 x 10mm Steel Nut
• 1 x 40mm Allthread
• 1 x 25mm Brass Washer (Diam. 25mm)
• 1 x Tube Grommet

Simply select between the option to have either an ES | E27 or a BC | B22 lampholder, as well as which colour (lampholder & cable) you would prefer.

Note: Ceramic base not included.

This kit uses a pottery nipple that will need to be inserted from inside then the lampholder will screw on top.
If you need help / guidance in installing this kit then visit our help centre and search for "Kit 17" or click on the following link for a step-by-step guide on how to install this kit: 'Kit 17 Instructions'

Important note for the Gold Lampholder - The Gold BC lampholder has "push Wire" terminals and not screw terminals. Also, it has a snap together body so once installed its not intended to be removed.

Spec:

ES | E27 | Edison Screw Lampholder Option 

• Height: 54mm
• Diameter: 40mm
• Shade Hole Diameter Between: 40-53mm 
• Material: Thermoplastic Resin

BC | B22 | Bayonet Cap Lampholder Option

• Height: 79mm
• Diameter Bottom: 24mm
• Diameter Top: 43mm 
• Shade Hole Diameter Between: 27-30mm
• Material: Thermoplastic Resin

Cable Spec:

• Cable Length: 2.5meters
• Cable Cores: 2 Core
• Cable CSA: 0.75mm
• Distance From Switch to Unwired End: 750mm approx.