What's Included In This Kit?
By clicking on each of the parts
listed above, you will be taken to their corresponding product page,
from here you can view and/or purchase each individual part of this kit.
ES | E27 Lampholder Kit for Ceramic Bases
This lamp kit 40 has been carefully designed and created to turn most ceramic lamp bases into a stunning table lamp.
Using British made materials, the lampholder and spacer is solid brass, then plated into the colours, giving a quality look and feel to your table lamp.
Simply select the lampholder colour, spacer height (if you want to raise the lampholder away from the lamp base) and cable colour.
The lampholder being used will accept a shade that has a hole diameter of approx. 40mm, comes complete with 2 shade rings to clamp the shade into position.
Inside the kit you will get a threaded rod with some nuts and washers, so you will need access up inside your lamp to hold onto the nut to tighten the assembly up.
The cable used is a 3-core cable that's 2.5m long with a switch located 800mm back from where the lampholder will be, please ensure you have enough length for this to work.
Spec:
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
ES | E27 Lampholder Kit for Ceramic Bases
This lamp kit 40 has been carefully designed and created to turn most ceramic lamp bases into a stunning table lamp.
Using British made materials, the lampholder and spacer is solid brass, then plated into the colours, giving a quality look and feel to your table lamp.
Simply select the lampholder colour, spacer height (if you want to raise the lampholder away from the lamp base) and cable colour.
The lampholder being used will accept a shade that has a hole diameter of approx. 40mm, comes complete with 2 shade rings to clamp the shade into position.
Inside the kit you will get a threaded rod with some nuts and washers, so you will need access up inside your lamp to hold onto the nut to tighten the assembly up.
The cable used is a 3-core cable that's 2.5m long with a switch located 800mm back from where the lampholder will be, please ensure you have enough length for this to work.
Spec:
- Lampholder: ES | E27 | Edison Screw
- Max Wattage: 60w (Lamp Not Included)
- Cable Size: 3 x 0.75mm
- Cable Length: 2.5m
- Distance from Switch to unwired end: 800mm
- Shade Facility: Yes (Shade not included)
