CLC

CLC

BC Black Unswitched Lampholder Snap On Cap 10mm Fixing [PLU67369]

Push wire terminals. The BC Unswitched Lampholder is a standard lampholder used on table lamps. It does not have a switch and comes with a 10mm thread in the cap or base to fix to a 10mm stud. The...

CLC

Black EU 2 core cord set with inline switch PLU28661

Black EU 2 core cord set with inline switch [PLU28661] Please Note: Cable length and distance from switch to unwired end may vary depending on stock levels at the time, Please contact us if you want...

CLC

Black rubber washer 13mm inside 23mm outside [2791869]

This Black rubber washer 13mm x 23mm.This product is ideal if your wanting to install a lampholder to a pottery or glass item.Generally the best way to do this is to use an all thread road and nuts...

CLC

Black Slide Action Foot Dimmer 60-300w PLU76075

The RT81 300w Dimmer is a neat slide action dimmer that will take a flex in from the plu and out to the lamp. It has a slide action from 0% to 100% of output operated with your foot. Easy to wire and...

CLC

Black Un-Switched 3 Core With Plug 3.5m Long 2784467

Black 3 Core Un Switched Cable complete with a moulded plug. This Black 3 Core Cable is ready to connect to your lamp and is 3.5m long.   Cable spec 3x 0.75mm with tinned ends ideal for push...

CLC

Cord Grip Transparent PG8TR 2691707

Transparent cord grip perfect for using in the base of a lampholder to create a hanging light fitting. Ideally used with our transparent cables. Comes in 2 parts the main cord grip section and a...

CLC

Economy Bronze Plated 10mm Switched Lampholder [3264258]

Economy Bronze Plated 10mm Switched Lampholder [3264258] 10mm threaded entry on base to fix to light fitting. This  lampholder comes with an external earth connection.  It also has a shade...

CLC

Economy Copper Plated 10mm Switched Lampholder [3264257]

Economy Copper Plated 10mm Switched Lampholder [3264257]10mm threaded entry on base to fix to light fitting.This  lampholder comes with an external earth connection. It also has a shade...

CLC

Economy Copper Plated BC Lampholder With 10mm Entry 3501155

Economy Copper Plated BC Lampholder With 10mm Entry 3501155 This economy BC lampholder is perfect for creating any copper pipe light or copper themed light fitting. Spec: Lamp Type: BC | B22 |...

CLC

Plain Cardboard Candle Tube 24 x 100mm Ivory Matt [PLU94704]

Candle Drip Cardboard 24 x 100mm Ivory Matt Finish Sold as singles. Ivory Cardboard - 100mm high x 24mm internal dia. 27.5mm outer diameter. Max. lamp 40w. Please ensure you order the...

CLC

Plain Cardboard Candle Tube 24 x 65mm Ivory Matt [PLU1288]

Candle Drip Cardboard 24 x 65mm Ivory Matt Finish Sold as singles. Ivory Cardboard - 65mm high x 24mm internal dia. 27.5mm outer diameter. Max. lamp 40w. Please ensure you order the...

CLC

Plain Cardboard Candle Tube 24 x 85mm Ivory Matt [2172199]

Candle Drip Cardboard 24 x 85mm Ivory Matt Finish Sold as singles. Ivory Cardboard - 85mm high x 24mm internal dia. 27.5mm outer diameter. Max. lamp 40w. Please ensure you order the...

CLC

Plain Plastic Tube Ivory 24 x 85mm [PLU77601]

Candle Drip Plastic Tube Ivory 85 x 100mm. Sold as singles. Ivory Plastic - 85mm high x 24mm internal dia. Max. lamp 40w. Please ensure you order the correct diameter for the lamp...

CLC

Black ceiling pendant rose [PLU10006]

Black ceiling plate perfect for hanging a piece of flex with a lamp holder on the end. This is a standard sized ceiling rose with a twist off lid and terminal connections inside. Diameter: 85mm...

CLC

Flex Cord Grip Black with long 10mm Male Thread PLU67889

This is a 10mm Cord Grip in plastic which is ideal if you have a flat or round flex cable. The Black 10mm Cord Grip is in 2 parts and when tightened it grips the flex. The male thread is 10mm in...

CLC

Flex Cord Grip White with 10mm Male Thread PLU61804

This is a 10mm Cord Grip in plastic and is used to screw into the base of a lampholder with a 10mm fixing. The White 10mm Cord Grip is in 2 parts and when tightened it grips the flex. Use on...

CLC

ES Lampholder with Pull Cord in Black 2194877

If you are looking for a pull cord on a E27 lampholder then this one should fit the bill. This E27 Lampholder With Pull Cord has an on / off switch inside the base of the lampholder and a White cord...

CLC

Plastic Washer With 13mm Inside And 23mm Outside [PLU21272]

Ideal for using where you are fixing to a fragile Ceramic or Pottery Vase. This Plastic Washer is ribbed to give it a better fix in the assembly. Use with Brass or Steel washers for a good solid grip...

CLC

Earth Tag For 10mm Allthread Rod [PLU95920]

If you need to add a eart connection on a lamp use this 10mm Eart Tag on the 10mm Allthreaded rod by fixing it with a nut. Best used in the base of a lamp build to earth the body of the lamp itself...

CLC

Fibre 1/2" Washer Inside 7/8" Outside [PLU64442]

For the fixing of lampholders where 1/2" fixed lampholders are used. The 1/2" Fibre Washer is ideal when fixing to a Ceramic or Pottery lamp. Sold in singles Outside diameter is 7/8"

CLC

Lampshade Reducing Ring Plastic PLU68328

Lampshade Reducing Ring Plastic PLU68328 This Plastic Lampshade Reducing Ring is ideal if you have a lampshade with a 40mm hole and need to fit it to a lampholder like a BC type that is designed for...

CLC

Tube Grommet For 1/2" Allthread [5101M13 PLU35792]

For use with 1/2" Allthreaded rod, these 1/2" Tube Gromets push in the ends to protect the flex from rubbing. These Plastic Grommets slide into the ends of the rod so make sure you add these before...

CLC

Tube Grommet For 10mm Allthread [5101 PLU69080]

For use with 10mm Allthreaded rod, these 10mm Tube Gromets push in the ends to protect the flex from rubbing. These Plastic Grommets slide into the ends of the rod so make sure you add these before...

CLC

Lampshade Reducing Ring Metal In White PLU55054

Lampshade Reducing Ring Metal In White PLU55054 If you need to hand a Lampshade with a 40mm shade ring on a 29mm lampholder then this Lampshade Reducing Ring will work well. It allows you to add a ES...

CLC

Black Push Button Switch PLU12884

Black Puch Button Switch comes complete with a Black Cap and is intended to be panel mounted. This switch is also found in some foot switched on standard lamps. It is rated at 1 amp.  Panel hole...

CLC

Flex Cord Grip 10mm Male Thread White PLU84298

10mm Flex Cord Grip in White with a male thread that is ideal for the bottom of a 10mm lampholder or female spacer. Comes with a plastic grub screw to grip the flex. The 10mm Flex Cord Grip Male can...

CLC

Pottery Nipple Plastic 10mm Thread [PLU71601]

This Plastic Pottery Nipple is ideal to hole a lampholder in place which has a 10mm base fixing. The 10mm Brass Pottery Nipple has a hex head is a plastic version. The thread length is 15mm long...

CLC

In Line Table Switch Black PLU27656

This In Line Table Switch Black is designed to be added to the flex of a table lamp. The In Line Switch has terminals for both the Neutral and Earth wires with the Live wire being connected to the...

CLC

In Line Table Switch White PLU6015

This In Line Table Switch White is designed to be added to the flex of a table lamp. The In Line Switch has terminals for both the Neutral and Earth wires with the Live wire being connected to the...

CLC

13A Plug T Pin Protector Plastic [PLU50464]

13A Plastic Plug Top Pin Protector. Used when selling the lamp to protect the 3 pins from damaging or scratching other parts of the lamp. Also used to protect the pins themselves. Sold as singles.

CLC

E27 Porcelain Lampholder with spring bracket PLU70617

ES Porcelain Lampholder With spring Bracket. Designed to be pushed into a hole no greater than 43mm Rated Temperature: T270 Material: Porcelain Terminals: Screw type for rigid or flexible cable 0...

CLC

E40 Porcelain Lampholder With Lugs - E40 PLU84213

E40 Porcelain Lampholder With Lugs This is a 40mm large ES lamp holder and not for a standard E27 lampRated current: 16A Rated voltage: 750v Rated Temperature: T300 Overvolte catagory: III Rated...

CLC

Fibre 10mm Washer Inside 10mm Outside 20mm [PLU33299]

For the fixing of lampholders where 10mm fixed lampholders are used. The 10mm Fibre Washer is ideal when fixing to a Ceramic or Pottery lamp. Sold in singles Outside diameter is 20mm

CLC

Cord Grip Saddle Clamp Type PLU19255

The Saddle Cord Clamp is designed to be held in place with a nut on the bottom of a Allthread rod. The Saddle Cord Clamp allows for the flex to be help in place and to turn it 90 deg. to allow it to...

CLC

E27 Porcelain Lampholder with Lugs PLU14667

ES Porcelain Lampholder With Lugs Spec:Rated Temperature: T270 Terminals: Screw type for rigid or flexible cable 0.5mm² - 2.5mm² Connection: Flat metal bracket with 2 through holes for M4...

CLC

Isolator For The E27 Lampholders PLU21502

If you use a 2 core flex and dont have an earth wire and the lampholder is help in place by a metal fitting use this E27 Isolator to help protect any damage to the wires on the metal. The E27...

CLC

Steel 10mm Allthread 15mm Long Hollow Rod [PLU18062]

For the fixing of lampholders with a 10mm threaded base fixing these 10mm Allthreads 15mm  long and with a hollow centre to allow the flex to run up the middle. Sold in singles Thread...

CLC

Steel 10mm Allthread 20mm Long Hollow Rod [PLU62990]

For the fixing of lampholders with a 10mm threaded base fixing these 10mm Allthreads 20mm  long and with a hollow centre to allow the flex to run up the middle. Sold in singles Thread...

CLC

Steel 10mm Allthread 25mm Long Hollow Rod [PLU69154]

For the fixing of lampholders with a 10mm threaded base fixing these 10mm Allthreads 25mm  long and with a hollow centre to allow the flex to run up the middle. Sold in singles Thread...

CLC

Core Flex Strain Relief Quick Fit PLU46359

This is a Quick Fit Cord Grip that can be fitted to the flex after it is connected to the lampholder. The Strain Relief Quick Fix loops onto the cable and then locked in place. It can be removed or...

CLC

Steel 10mm Allthread 35mm Long Hollow Rod [PLU13109]

For the fixing of lampholders with a 10mm threaded base fixing these 10mm Allthreads 35mm  long and with a hollow centre to allow the flex to run up the middle. Sold in singles Thread pitch...

CLC

Steel Hickey With 10mm Thread [PLU11455]

Steel Hickey With 10mm Thread.This Steel hickey with 10mm thread is perfect for several different applications such as, extending and all thread rod.Or using it as a cable entry into an all thread...

CLC

Twin In Line Foot Switch For Lamps In Black PLU58355

This is a neat Twin Inline Foot Switch in Black. The housing contains 2 separate push switches that can be wire to operate 2 separate lights. The switches are a 1A so will switch 230w lamps. Cord...

CLC

Side Action Pull Switch With Cord PLU43791

Side Action Pull Switch comes complete with a 150mm cord and toggle. This is a 2 amp Side Action Pull Switch use in several applications. Has a centre hole for fixing. Dimensions are, 28mm long and...

CLC

Steel 10mm Allthread 50mm Long Hollow Rod [PLU19295]

For the fixing of lampholders with a 10mm threaded base fixing these 10mm Allthreads 50mm  long and with a hollow centre to allow the flex to run up the middle. Sold in singles Thread pitch...

CLC

Steel 10mm Allthread 60mm long [PLU10126]

For the fixing of lampholders with a 10mm threaded base fixing these 10mm Allthreads 60mm  long and with a hollow centre to allow the flex to run up the middle. Sold in singles Thread pitch...

CLC

Closed End Plastic Screw Connector [PLU25377]

If you need to connect several wire together in a small confined space, use these Closed End Screw Connectors. These have a closed end so the wires are twisted and inserted from one end, then the...

CLC

Steel 10mm Allthread 75mm Long Hollow Rod [PLU85962]

For the fixing of lampholders with a 10mm threaded base fixing these 10mm Allthreads 75mm  long and with a hollow centre to allow the flex to run up the middle. Sold in singles Thread pitch...