Lampholder Kit 9 For Wooden Lamp Bases With Nipple Fixing [KIT9]
Lampholder Kit 9 For Wooden Lamp Bases With Nipple Fixing
Lamp Kit 9 Allows the White Switched BC Lampholder to be fitted onto a Wooden Lamp base with no fixing showing. The Wood Nipple is screwed into the base of the lampholder and then screwed into the wood, use a 9.5mm or 10mm pilot hole depending on how hard the wood is. You can then remover the top part of the lampholder to finished the wiring.
As the lampholder is plastic dont put too much force on it when adding the nipple to the wood.
This kit uses a 10mm nipple and lampholder of is you need to raise the height see the related products for ideas.
The flex is 2.0m long.