This White Plain E27 Lampholder With Push Wire Terminals is perfect for replacing a broken one on your light fitting. Comes with a 10mm Male thread on the bottom so will simply screw onto your existing 10mm diameter thread.
The E27 lampholder with push wire terminals comes in 2 parts. The main body and the cap. There are no screw terminals for the wires on this lampholder so your wires must have either a ferrules or be soldered so they can be pushed into the terminals. Please also note that once the wires are pushed in they are not intended to be taken out again.
There are 2 options for this lampholder:-
- 10mm Plastic Thread: This is all plastic this will be used if you only have a 2core cable and there is no provision for an earth cable. This does not have a locking screw so a dab of super glue may be required.
- 10mm Metal Thread: This has a metal thread in the base with a locking screw to lock the lampholder onto your 10mm thread, also has an earth connection and should only be used if you have a 3core cable with earth
- Lamp Type: ES | E27 | Edison Screw
- Height: 60mm
- Diameter: 40mm
- Thread: 10mm
- Material: Plastic
- Colour: White