Karcher HDS Pressure Washer Steam Jet Nozzle 40º
A Kärcher steam jet nozzle converts hot water from a HDS pressure washer into a concentrated, high-temperature steam jet, effectively eliminating dirt, grime, and bacteria from a variety of surfaces. Ideal for chemical-free sanitising and deep cleaning, Steam Jet Nozzles offer a powerful and eco-friendly cleaning solution.
Nozzle Size (Ø40)
A steam jet nozzle's size primarily refers to the diameter of the orifice (opening) through which the steam is discharged. This size is a critical factor in determining the jet's performance, including the operating pressure, flow rate, and the force or velocity of the steam
Nozzle Spray Angle (40º)
A steam jet nozzle's spray angle is the measurement of the opening angle formed by the steam jet as it exits the nozzle orifice. This angle determines the spread and concentration of the spray, which in turn dictates the coverage area and impact force on a target surface.
Compatibility
In order to fit this nozzle, you will need to remove the end connector on your lance, then place the nozzle on the end of the lance, before screwing the end connector back on and over the top of the nozzle.
Compatible with the Following *GB Machines:
Specification
A Kärcher steam jet nozzle converts hot water from a HDS pressure washer into a concentrated, high-temperature steam jet, effectively eliminating dirt, grime, and bacteria from a variety of surfaces. Ideal for chemical-free sanitising and deep cleaning, Steam Jet Nozzles offer a powerful and eco-friendly cleaning solution.
Nozzle Size (Ø40)
A steam jet nozzle's size primarily refers to the diameter of the orifice (opening) through which the steam is discharged. This size is a critical factor in determining the jet's performance, including the operating pressure, flow rate, and the force or velocity of the steam
- Smaller Nozzle Size = more concentrated and powerful jet.
- Larger Nozzle Size = higher flow rate but results in lower pressure and velocity
Nozzle Spray Angle (40º)
A steam jet nozzle's spray angle is the measurement of the opening angle formed by the steam jet as it exits the nozzle orifice. This angle determines the spread and concentration of the spray, which in turn dictates the coverage area and impact force on a target surface.
Compatibility
In order to fit this nozzle, you will need to remove the end connector on your lance, then place the nozzle on the end of the lance, before screwing the end connector back on and over the top of the nozzle.
Compatible with the Following *GB Machines:
- HDS 6/10 C (1.169-906.0)
- HDS 6/12 C (1.169-904.0)
Specification
- Dimensions: 27mm x 17mm x 17mm
- Nozzle Size: 40
- Angle: 40°
- Included: 1 x Nozzle and 1 x O-Ring
- Genuine Karcher Part
