Karcher Power Nozzle 25° (Nozzle Size: 36)

Karcher Power Nozzle 25° (Nozzle Size: 36)

The genuine Karcher Power Nozzle with a 25° spray angle is designed for high-output cleaning across large surface areas. Built as a robust flat jet nozzle, it delivers a strong, even spray pattern that balances cleaning power with wide coverage, making it ideal for demanding outdoor and commercial cleaning tasks. Manufactured to Karcher’s exact standards, it ensures reliable performance and long-term durability.


+40% Power & 25º Spray Angle

With a 25° spray angle, the nozzle provides effective dirt removal while reducing the time required to clean expansive areas such as floors, driveways, and walls. Delivering up to 40% more power compared to standard nozzles, it helps tackle stubborn grime more quickly and efficiently. Designed for quick and secure connection to compatible Karcher lances, this power nozzle is an excellent choice for professional users seeking consistent results and improved productivity.


Ø36 Nozzle Size

Nozzle Size refers to the diameter of the opening through which the water flows, which is a critical factor in determining the water flow rate and the resulting pressure of the spray.

• Smaller Nozzle Size = higher impact, more forceful jet of water.
• Larger Nozzle Size = lower pressure spray but a higher overall flow rate (GPM/LPM)

Using the correct nozzle size ensures optimal performance and safety for both the operator and the machine. 

• Wrong Size (Too Small): creates excessive back pressure on the pump, which can strain the motor, cause the unloader valve to cycle repeatedly (known as "surging"), and potentially lead to long-term damage.
• Wrong Size (Too Large): will result in insufficient pressure, reducing the machine's cleaning power and efficiency

Nozzles wear out over time, and the orifice hole slowly gets larger, which causes a gradual decrease in pressure. Replacing a worn nozzle is important to restore the correct operating pressure and efficiency. 


Compatibility

The nozzle size should be matched to your specific pressure washer's flow rate and pressure rating. Type your machine's model number in the 'check compatibility' box below in order to confirm this nozzle will be compatible.

In order to attach this nozzle you will need to remove the end of your spray lance (image 1) and simply place this power nozzle onto the end piece of the lance (image 2) before reattaching the end piece back onto the end of the lance (image 3).


Please Note: This nozzle is only compatible with M22 x 1.5 lances.


Specification

• Nozzle Size: 36
• Angle: 25º
• Connection Thread: M22 x 1.5 
• Genuine Karcher Part