SES | E14 | Small Edison Screw Transparent Threaded Lampholder with Push Wire Terminals 8980077
This lampholder is perfect for smaller project and lighting designed. Made from Thermoplastic resin it has a max 210°C working temperature rating.
This lampholder has no provisions for an earth cable so we recommend in using a 2 core cable only.
Installation of the cables onto the lampholder are via push fit connections, you will need to ensure the ends of the cables have a ferrule or a dab of solder.
You cannot install a multi stranded cable into this lampholder, please contact us if you have any questions.
Comes with a built in cord grip, an isolator and 2 shade rings.
Note: You will need to snap off the moulded cap/end on the isolator in order for it to fit inside the lampholder.
Spec:
Lamp Cap: SES | E14 | Small Edison Screw
Height: 62.5mm
Diameter: 32.5mm
Diameter (inc. shade rings): 43mm
Material: Thermoplastic Resin (Plastic)
This lampholder is perfect for smaller project and lighting designed. Made from Thermoplastic resin it has a max 210°C working temperature rating.
This lampholder has no provisions for an earth cable so we recommend in using a 2 core cable only.
Installation of the cables onto the lampholder are via push fit connections, you will need to ensure the ends of the cables have a ferrule or a dab of solder.
You cannot install a multi stranded cable into this lampholder, please contact us if you have any questions.
Comes with a built in cord grip, an isolator and 2 shade rings.
Note: You will need to snap off the moulded cap/end on the isolator in order for it to fit inside the lampholder.
Spec:
Lamp Cap: SES | E14 | Small Edison Screw
Height: 62.5mm
Diameter: 32.5mm
Diameter (inc. shade rings): 43mm
Material: Thermoplastic Resin (Plastic)
