null Skip to main content
Stocked Products
Quality Assured

BC | B22 | Bayonet Cap Chrome Un-Switched Lampholder With 10mm Fixing

(Inc. VAT)
(Ex. VAT)
Polti Brand
Sebo Brand
Numatic Brand
Bissell Brand
Karcher Brand
From £4.69 - Free over £75
BC | B22 | Bayonet Cap Chrome Un-Switched Lampholder With 10mm Fixing.

This product is perfect for a quick fix, the Chrome BC | B22 | Bayonet cap lampholder comes with a 25mm long threaded rod with a 25mm washer and a steel nut.
Ideal for fixing onto a metal item, comes in the 10mm thread, so you can easily add additional washers or nuts if required.

You can cut the threaded rod down with a hacksaw easily for those lamp bases with not a lot of room. Once the lampholder is screwed onto the thread, you have 20mm of thread to play with.

Ideal for the following items:

  • Wooden Base: If you have a wooden item, you can remove the washer and nut and glue/tap in the threaded rod into the wooden base.
  • Ceramic Base: For ceramic bases ideally you would want an additional rubber washer SKU: 21272 and maybe an additional metal washer SKU: 7202 and nut SKU: 81852
  • Metal Base: As long as you have an approx. 10mm hole then you can use this as is simply pop the lampholder with thread into the hole, use the washer + nut to tighten to the metal fixing.

This lampholder will require a 3 core cable as it's metal and will need to be earthed.
You can install a lampshade onto this lampholder.

The lampholder has a thread lock, meaning inside the cap (bottom section) of the lampholder is a screw that once installed onto the threaded rod and tightened up it will lock the cap to the thread, this means there will be no movement once fully installed.

  • Lamp Cap: BC | B22 | Bayonet Cap
  • Height: 48.5mm
  • Diameter: 32mm
  • Thread: 10 x 20mm (once screwed into the lampholder)
  • Min Shade Hole Size: 26mm
  • Max Shade Hole Size: 32mm
  • Max Wattage: 60w
  • Material: Brass
  • Finish: Chrome Plated